Cast copper parts have a very complex form of production parts
Cast copper parts mechanical parts, perfect copper physical properties, can be different, resistance, the ultimate performance of hardness, can also combine one or more of the specific characteristics such as usury and resist high temperature and low temperature, corrosion resistance, and so on. The weight and height of the beach line width is wider than a few grams, the maximum possible is 400 tons, the wall thickness is 0.5 mm, the thin, the ice can be more than 1 meter, the length can be several millimeters to 10 meters, and can be used to meet different industrial sectors. .
Wire-type copper required for the process of casting copper parts:
1. Each process, clean up, in order to prevent the remainder from carefully following the procedures in the pore solution;
2, copper effective threshing machine parts, powerfully explained the calculation of multiple impact areas, if it is about three times the population density of parts, pre-production / post-natal silver package time is longer;
3, copper, prenatal, postpartum, a person's parts for the same set of frequent interruptions, to ensure uniform color of the lining, in order to prevent the impact of the quality of the lining in the money;
4, money, should be responsible for the crack, understand the impact of population density during the plating process during the workpiece processing process swept the workpiece for 5 minutes, then the density trend is normal.
5. When the treatment is passivated to enhance the clean water blocked by rinsing in 10 to 20 minutes, then wash the water in the desalting kiln and immediately be able to monitor the temperature for a little time to avoid production.
Cast copper parts have a very complex form of production parts inside a cavity. Make sure that each box, riverbed machine (tool kit, one roll, head roll, etc.) is flexible and adaptable. The casting part is almost unlimited in size, which can pass several grams to several hundred tons, wall thickness It can be set to about 0.5 mm and a meter. The industry can be combined into a liquid metal material that can be formed into a liquid. The casting of plastic is very low, the only way is liquid or a room that presents its outline. The cost of cast copper parts is very high. Low. Casting can directly use liquid waste petroleum parts and equipment wood chips, low cost. At the same time, short-chain chlorinated paraffin casting liquid metal has low endurance and saves. Centrifugal discharge, spray low-pressure melt flow, production and processing parts Parts of copper, copper, copper wheels, non-ferrous metal products for mothers, copper cable copper and various miscellaneous machines and equipment. Technology casting is excellent and meets the national quality standards of materials, ensuring significant improvement in product quality, compared to other Internet users who are affirmed and recognized by manufacturers still make up the majority.
